Case Study:
Helix® Flexible Screw Conveyor Feeds Innovative Tubular Form, Fill and Seal Packaging Solution


Download PDF
Download PDF A4

CHALLENGE

A packaging equipment supplier needs a low-cost, reliable conveying solution to keep his innovative form-fill-seal solution demonstrating at capacity.

CUSTOMER

IMS Group USA (Innovative Machinery Solutions)

INDUSTRY

Packaging Equipment


BUSINESS BENEFITS REALIZED

Form-fill-seal equipment reaches full capacity of 1,200 bags per hour.
Payback for turnkey system achieved in less than a year with low-cost, reliable conveying solution.

 

Helix Flexible Screw Conveyor InstallationBased in Grand Rapids, Michigan, IMS Group USA offers bulk solids packaging solutions for the food, pharmaceutical, resin, chemical and other industrial markets.

In addition to form, fill and seal equipment, IMS Group imports and assembles carton formers and sealers, case packers, tray formers as well as pick and place palletizers manufactured in Italy.

In 2010 IMS Group USA set up a showroom to demonstrate an automated form, fill and seal solution.

“It’s not good enough to simply talk about solutions,” said Nico Nicoletti, President of IMS Group USA. “Processors have a real need to see the equipment in action to truly understand how it can benefit their process.”

INNOVATIVE SOLUTION IS ‘IN THE BAG’

IMS Group USA chose to demonstrate the TB 1200, an innovative solution that simultaneously forms, fills and seals bags. Using a reel of plastic film instead of individual, pre-formed bags, the TB 1200 can be programmed to create bags ranging in volume from 2 to 18 gallons (7.5 to 68 liters) and 13.5 to 29.5 inches (343 to 749 millimeters).

The bag shape can be pillow or gusseted (square shape) for more stable palletization. Once formed, the bag is filled and impulse thermo-sealed. Typical payback of the system is less than one year due to savings in bag material and labor through automation.

SIMPLE, RELIABLE FEEDING SOLUTION NEEDED

In order to demonstrate an ability to fill up to 1,200 bags per hour (20 per minute), Nicoletti needed to integrate a conveying solution to the TB 1200 filling hopper.

“You need quite a bit of material when demonstrating the TB 1200 to customers,” said Nicoletti. “I wanted a solution that was simple to use, affordable and reliable. Hapman was highly recommended as an industry leader in conveying solutions, so I turned to them for an answer.”

HELIX FLEXIBLE SCREW CONVEYOR SELECTED

Helix Flexible Screw Conveyor and Hopper Installation with Nico Nicoletti of IMS GroupIMS Group USA encourages customers to send their product to its showroom to try out the TB 1200. However, when customer-specific material is not available, IMS Group USA uses a plastic pellet that is representative of the type of bulk solids suitable for this equipment as a general demonstration material. Hapman’s 300 Series Helix flexible screw conveyor with polyurethane hopper and flat wire auger was selected to convey the material 28 feet (8.5 meters) to the filling hopper, which is 20 feet (6 meters) above ground level.

“We’re very pleased with the conveying solution,” noted Nicoletti. “In addition to being highly effective, it is a very economical solution. Combined with the TB 1200, we’re able to offer a turnkey solution that provides a real payback in under a year.”