LumpMaster® Lump Breaker
As your complete source for all bulk material handling needs, we have engineered the LumpMaster® specifically to reduce natural agglomerations that can occur during storage or shipping, or to reduce deliberately compacted materials. Featuring counter-rotating dual shafts, outboard bearings, and a direct coupled drive, this equipment is designed to reduce lumps to approximately ¾” and allow material to be effectively handled by downstream conveyors.
Clumping prevention begins when material enters the LumpMaster through the opening in the top. Pieces of material too large to pass through the rotating shaft pins and the stationary combing bars are crushed as the shaft weldments rotate. The material continues to be crushed until it is small enough to pass through.
Engineered for Compact, Inline Operation
Lump breakers are a necessary component of most bulk material handling systems. They are best used in an inline operation at the discharge point of raw material. To best accommodate this important bulk material handling dynamic, we have engineered our complete LumpMaster line to compactly fit under automatic unloading equipment, manual bag emptying stations, or at the discharge point of storage silos or containers.
- Choose from carbon steel, 304 or 316 stainless steel construction
- Washdown or explosion-proof applications are available
- Available in three sizes, 12 in square , 18 in square or 24 in square
Proof of our unwavering confidence in our product and team.
Our Performantee is a 100% operational guarantee that you will be fully satisfied with the performance of our equipment, and that it will achieve the specific results for which it was designed and manufactured. If not, we will revise or repair it to deliver the results we promised.