Your goals are achieved with our custom engineered material handling equipment and systems
 

PosiPortion Feeder

The Hapman full line of screw feeders consisting of the PosiPortion™ Feeder, Screw Feeder, and Vac-Feeder, are engineered for industrial processing of dry material in either continuous or batching operations. The industrial screw feeders we manufacture are used in a wide range of material handling applications. Whether your material is free-flowing, such as pellets and powders, or more difficult moving, such as pigments, fibers, and sticky or lumped material, we have the experience and the equipment to effectively and accurately meter your product.

next: PosiPortion

PosiPortion Feeder

Precisely and Consistently Feed a Wide Range of Materials

  • Precisely feeds and measures free-flowing and sluggish bulk solids, granules and powders.
  • PosiPortion FeederAchieves superb volumetric performance through flexible hopper with steep side walls, large inside corner, and long throat to maximize natural in-flow while facilitating external agitation.
  • Easily disassembles, easily cleans because of quick coupled components, maximizing uptime. See video below.
  • Satisfies more applications than any other feeder design.
  • Maintains material quality without degradation, segregation or agglomeration.
  • Versatile design provides discrete batches or operates continuously on a rate-controlled basis.
  • PosiPortion FeederStarts under heavy loads, making the unit ideal for installing beneath silos and large surge hoppers.
  • Delivers premium enhanced performance. More automatic operation, validation and status monitoring is available through the simple addition of a scale and weight differential instrumentation.
  • Warns you when hopper gets low so you can keep hopper full and keep feed rate consistent.
  • 5-year limited warranty on flexible hopper.

PosiPortion Feeder Teardown

 

Features
Options
Specifications

Features

  • Reinforced Steel flange on hopper.Handle and store hopper easily. Steel reinforcement molded into the flexible hopper flange enables the hopper to retain its shape and capacity when removed;
    even when full of product.
  • Screw is quick-coupled allowing the hopper to be removed in seconds. Unique design prevents decoupling when torque is applied.
  • Get the strength and stability of structural tube-frame construction with the ability to support large hoppers or ancillary equipment.
  • View inside of Feeder.Optimize product flow with external paddle agitators that reduce bridging, limit material contact surfaces, reduce opportunity for contamination and simplify cleaning.

Options

  • Straight nozzle on Feeder.

    Choose from straight nozzles, T-nozzles, nozzles with screw support bearing and elongated distribution nozzles for a variety of metering, spreading and seasoning applications.
  • Choose from many easy-to-change-out auger options — flat, square, or round (with or without a center core), continuously welded, polished or milled from solid bar stock — to suit your exact need.
  • Increase holding capacity and extend time between refills with optional hopper extensions.
  • Minimize housekeeping and air quality problems with optional dust collection hood. Keeps material in process; makes work environment safer.
  • Handle spreading and seasoning applications with optional elongated distribution nozzle. Ideal for feeding seasoning drums or distributing across moving conveyor belts.
  • Use in coating drums, across moving conveyor belts or for filling wide surge hoppers.
  • Alert your control system when material is getting low in the hopper. Optional level sensors help workers keep hopper full and feed rate consistent.
  • Integrating load cells and instrumentation enables the equipment to perform more automatically, immediate feedback that material was delivered, and increased performance.
  • Volumetric and Gravimetric options are available. The best option for your process will be determined by the specific material used and unique details of your application.
Feeder with T-Nozzle Feeder with T-Nozzle and load cell.
Feeder on optional load cell. Auger options for Screw Feeder.

Specifications

Standard models and theoretical capacities:

Model Hopper Capacity Feed Rate
160 600 in³
(9,832 cm³)
60 in³ to 5 ft³/hr
(983.22 cm³ to 0.142 m³/hr)
240 1 ft³
(0.028 m³)
1 ft³ to 5 ft³/hr
(0.028 m³ to 1.416 m³/hr)
320 3 ft³
(0.085 m³)
5 ft³ to 1,100 ft³/hr
(0.142 m³ to 31.15 m³/hr)

Nominal feeder frame dimensions:

Dimension Model 160 Model 240 Model 320
Depth 16 in
(40 cm)
24 in
(60 cm)
32 in
(80 cm)
Width 16 in
(40 cm)
24 in
(60 cm)
32 in
(80 cm)
Height 13 in
(33 cm)
17 in
(43.18 cm)
26 in
(66.04 cm)
Nozzle Length as required as required as required

next: Screw Feeder

Screw Feeder

Economical, Robust Feeder Designed to Handle Dry Powder & Thick Paste Effectively

Screw Feeder

  • Precisely feeds and measures free-flowing and non-free flowing bulk solids, granules and powders.
  • Achieves superb volumetric performance through style, design, and a variety of agitation options.
  • Robust design that will operate in harsh conditions and delivers material consistently regardless of material.
  • Can be slightly pressurized, for purging. Also, can operate where process is under pressure.
  • Made of carbon steel, 304 stainless steel, 316 stainless steel or other special alloys.
  • Starts under heavy loads, making the unit ideal for installing beneath silos and large surge hoppers.
  • Delivers premium enhanced performance. More automatic operation validation and status monitoring is available through the simple addition of intuitive controls.
  • Warns when the hopper gets low so you can keep the hopper full and feed rate consistent.
Features
Options
Models

Features

  • Solid and robust construction
  • Independent feed and agitation
  • Any configuration upon request
  • Controls in either volumetric or L-I-W (Loss and Weight), gravimetric, mode
  • Unit can be made with many different alloys (hastelloy c, 316 SS, etc.)
  • Unit can be in low pressure environments
  • Standard size

Options

  • Ideal for dry mixing applications
  • Can be used in place of rotary valves underneath silos
  • Ideal for clumpy material that need continued agitation
  • Can be configured to any geometry

Specifications

Standard models and theoretical capacities:

Model Hopper Capacity Feed Rate
UT-160 600 in³
(9.832 cm³)
60 in³ to 5 ft³/hr
(983.22 cm³ to 0.142 m³/hr)
UT-240 1 ft³
(0.028 m³)
1 ft³ to 50 ft³/hr
(0.014 m³ to 1.416 m³/hr)
UT-320 3 ft³
(0.085 m³)
5 ft³ to 1,100 ft³/hr
(0.142 m³ to 31.15 m³/hr)

Nominal feeder frame dimensions:

Dimension Model UT-160 Model UT-240 Model UT-320
Depth 16 in
(40 cm)
24 in
(60 cm)
32 in
(80 cm)
Width 16 in
(40 cm)
24 in
(60 cm)
32 in
(80 cm)
Height 20 in
(50 cm)
30 in
(75 cm)
40 in
(100 cm)
Nozzle Length as required as required as required

next: Vac-Feeder

Vac-Feeder

Compact, Portable Conveying, Metered Feeding, and Solid/Liquid Combining System

Vacuum FeederOur engineered Vac-Feeder is a unique combination of conveying, metered feeding, and dry/liquid combining equipment for small batch or low volume applications. The Hapman Vac-Feeder was developed from an increasing industry need for a cost-effective method of unloading small batches of dry bulk material and pre-mixing the material into a solution. Typically the low volume material handling applications were saddled with a labor intensive, time consuming process because the batch operation did not cost justify large capital equipment. Recognizing this growing trend, our engineering team worked with several customers to develop the optimal equipment for the job. The Vac-Feeder has a small footprint, lower cost and is frame mounted.

The Vac-Feeder Operation

The Vac-Feeder operation begins with a special filtered vacuum conveyor that uses an electric motor to create suction. The vacuum conveyor comes with an integral filter for capturing material dust. The material is fed from the conveyor into the surge hopper of the feeder which then accurately and precisely feeds material into an educator system which incorporates the dry material with the liquid. The operator can see the volume of material in the hopper at all times using a sight window that is an integral to the hopper. The educator creates a venturi affect, pulling the dry material into the liquid stream, quickly combining the two. The system is engineered for accurately incorporating the two elements depending on the dry material volume, bulk density of the material, and type and volume of liquid introduction.

Vac-Feeder Features and Options

The Vac-Feeder is also available in a dry only model. This unit is beneficial for small batch, dry conveying and feeding, where no liquid introduction is needed. The dry only Vac-Feeder offers the same cost and labor savings as the dry/liquid combining version, but without the educator. The metered dry material will feed directly into the process.

  • Compact, portable, cost-effective liquid/solid combining system
  • Feeder hopper comes with an integral Polycarbonate window for easy operator viewing
  • Available in a liquid/solid coalescing unit or a dry only unit with vacuum conveyor and screw feeder
Features
Models

Features

  • Volumetric control
  • Integral vacuum conveyor mounted on top of the feeder hopper
  • Industrial grade wand for operator to easily convey material from drums, lined boxed, or other storage bins
  • Clear view sight window for easy operator monitoring of material level in the hopper
  • Portable unit option available, complete with heavy-duty casters
  • Designed with optimal feeder size for precise delivery of dry material
  • Hapman exclusive, engineered wetting cone and educator designed for optimal mixing
  • Integral isolation valves for tight shut off of dry material and liquid flow
  • Cost effective, priced for quick payback and tight budgets
  • Ideal for polymer, resins, and many other dry materials and mixing environments
  • Commonly used in laboratories, small batch plants, water treatment facilities, and more
  • An excellent equipment choice for food processing applications to quickly and effectively mix dry product with water

    Models

    Standard models - Stated capacities are theoretical based on assumed parameters:

    Model Hopper Capacity Feed Rate
    VF-160 60 in3 to 5ft3/hr (983 cm3 to 0.142m3/hr)
    VF-240 1 ft3 to 50ft3 to1,100 ft3/hr (0.014m3 to 1.416 m3/hr)
    VF-320 5 ft3 to 1,110 ft3/hr (0.142 to 31.15 m3/hr)

    next: Applicatons

    Our applications experts will work with you to create the exact system to meet your specific material handling needs.

    Hapman Volumetric Screw Feeder/SeasonerPosiPortion™ Volumetric Screw Feeder/Seasoner – The equipment shown, engineered for an accurate +/- 1% metered dose based on volume and time, is specifically designed for seasoning drums or tumble coaters for snack food and candy manufacturers. Precision dosing is measured by keeping the screw full and measuring the volume of material in the feeder coupled with turn speed, pitch of flights and turning time.

     

    Models available:

    • Model 321-SV – equipped with a 304 stainless steel distribution nozzle with 42" projection and herringbone slot pattern. The dosing screw has a nominal outside diameter of 4" standard pitch and a root diameter of 1". Flow range estimated at 14-230 ft3/hr, approximately 172 ft3/hr @ 60 Hz based on free flowing powders.
    • Model 241-SV – engineered for smaller batch operations designed with a nozzle OD of 1-1/2” with standard pitch and a root diameter of 3/8”. The capacity range of the 241-SV is approximately .88-14.2 ft3/hr or 10.6 ft3/hr @60 Hz based on free flowing powders.

    The long throat design maximizes natural in-flow allowing for easy handling of difficult ingredients and compounds. Featuring a FDA hopper design and food grade finishes on all contact surface including the hopper interior, screw and nozzle.


    Bag Dump Station with Helix Flexible Screw Conveyor and loss-in-weight (Gravimetric) Screw FeederBag Dump Station with Helix Flexible Screw Conveyor and loss-in-weight (Gravimetric) Screw Feeder – The system pictured uses the feeder as the control point, measuring and metering the flow of material based on a pre-set flow rates and minimum accumulation levels. When the reading on the scale drops below set-point, the Helix is called to feed additional material from the main hopper into the feeder hopper. The lighted alarm notifies workers when additional bags of material need to be emptied into the main hopper. The dump station, with integral dust collector provides workers a safe and clean way to quickly empty bags into the hopper. The entire system is skid mounted on casters for easy mobility throughout the plant.


    Volumetric PosiPortion Feeder with Bag Dump Station and removable self-contained Dust Collector.Volumetric PosiPortion feeder with Bag Dump Station and removable self-contained dust collector - The equipment shown consistently meters powders into a process on a volumetric basis. This use of the PosiPortion feeder and Bag Dump Station is especially efficient in solving dust control/containment challenges in standalone feeder applications.

     

     

     

     


    Stainless Steel PosiPortion Feeder with hopper and extended T-nozzleStainless Steel PosiPortion feeder with hopper and extended T-nozzle - The equipment shown includes an extension hopper that is sized for quick refill, optimizing feed rate accuracy, an extended T-nozzle which directs material to a process inlet, as well as a load cell. In conjunction with the PosiPortion feeder, the load cell provides means for continuous weight-based feed rate control, ensuring the delivery of highly accurate batches by weight. Additionally, the load cell can be used to provide the net weight of material used in a process.

     

     

    Back